LGM Products Ltd
Unit 18
Riverside Industrial Park
Dogflud Way
Farnham
Surrey
GU9 7UG
United Kingdom

Tel: +44 (0)1252 725257
Fax: +44 (0) 1252 727627
Email: sales@Lgmproducts.com





Cable Tray Fixings

Edge Clips
The knock on edge clip is designed for steel work of differing thickness. These fixings are available in mild steel with a zinc rich plated finish, which has excellent resistance to corrosion and heat. The Heat Sensing Cable must be secured to the edge clip with the neoprene sleeve and tie wrap supplied.

Part No A ø
FX/2H4 2-3mm 7.1mm
FX/4H24 3-8mm 7.1mm
FX/4H58 8-14mm 7.1mm
FX/4H912 14-20mm 7.1mm
Edge Clip

J Clips
The knock on J clips are suitable for the support of Heat Sensing Cable from the outer edge of conventional cable tray. The Heat Sensing Cable must be secured to the edge clip with the neoprene sleeve and tie wrap supplied.

Part No A Minimum Return
FX/J1 1.5-4mm 10mm
FX/J2 4-6.5mm 10mm
Edge Clip



Walling & Ceiling Cable Fixings

The ideal location for heat sensing cable is on the ceiling at the top of the side wall. This ensures that the cable is rapidly exposed to the plume of hot gases from any event that rise and spread across the ceiling. In general one clip should be used every metre, however, two clips would be mounted together at 90°C where the cable route changed direction.

A Clip

Manufactured from nylon with M6 fixing holes complete with cable tie. Ideal for installation where heat transfer from the fixing point to the heat sensing cable must be minimised. The fixing screw is not included.

Part Number ref: FX/A


T Clip

A polypropylene plastic moulding with a slot into which the heat sensing cable is located. For extra security a tie wrap may be used in a figure of eight arrangement to prevent the cable from being pulled from the clip. The fixing screw and tie wrap are not included.

Part Number ref: FX/T


P Clip

Zinc plated steel clip with santoprene cushion insulator. The fixing screw is not included.

Part Number Ref: FX/P